Table of Contents
Advertisement
Thank you for your purchase of K&S Basic products. This manual contains a brief description of safety, use
and debugging. More information can be found on the official manufacturer's website in the support section:
ks-power.de/betriebsantleitungen.
You can also go to the support section and download the full version of the manual by scanning the QR code, or on
the website of the official importer of K&S Basic products: www.ks-power.de/en.
Manufacturer reserves the right to make alterations into the generators, which may not be reflected in this manual.
Pictures and photos of the product may vary from its actual appearance. At the end of this manual, You may find
contact information which you are free to use in case of any issues occurrence.
All data, specified in this operation manual is the most up to date for the moment of its publishing. The current list of
service centers you can find at the website of official importer: www.ks-power.de/en.
ATTENTION – DANGER!
IMPORTANT!
Safety symbols and description of inscriptions can be found in the full electronic version.
Safety symbols and description of inscriptions can be found in the full electronic version.
Do not use the generator in rooms with poor ventilation or in conditions of excessive humidity. Do not place the gen-
erator in water or on moist soil. Do not expose the generator to rain, snow, as well as to direct sunlight for a long time.
Place the generator on a flat, hard surface, away from flammable liquids/gases (at a minimum distance of 1 m). Keep
unauthorized persons, children, and animals away from work area. Wear safety shoes and gloves.
ATTENTION – DANGER!
ATTENTION – DANGER!
The generator produces electricity that may lead to an electric shock while neglecting compliance regulations. K&S Basic
generators were initially designed as an IT system with basic protection by insulation of hazardous live parts according
to DIN VDE 0100-410. The generator housing is insulated from the current-carrying L and N conductors. The generator
must be grounded in all cases, except for an IT system with an insulated neutral wire and bonding. A grounded IT sys-
tem requires the use of an insulation monitoring device. Further details regarding the use of the generator in IT and
TN systems can be found on our website or requested from our technical support. Wires with damaged or spoiled
insulation should be replaced. You should also replace worn, damaged or rusty contacts.
We care about the environment, therefore, we consider it expedient to savepaper and
We care about the environment, therefore, we consider it expedient to savepaper and
leave in print a short description of the most important sections.
leave in print a short description of the most important sections.
Be sure to read the full version of the manual before
getting started!
Failure to follow the recommendations marked with this sign may
lead to serious injury or death of the operator or third parties.
Useful information while operating the machine.
During operation of the engine, the tiller allocates exhaust gases
CO
that can cause poisoning. Do not use the device in closed,
2
badly ventilated areas
The device generates electricity. Follow safety precautions to
avoid electric shock.
INTRODUCTION
SAFETY INFORMATION
ELECTRICAL SAFETY
www.ks-power.de/en
1
1.1
| 1
Advertisement
Table of Contents
