Specifications; Terms Of Use - K&S BASIC KSB 40i S Owner's Manual

IMPORTANT!
Model
Voltage, V
Max Power, kW
Nominal Power, kW
Frequency, Hz
Current, A (max.)
Outlets
Engine start
Fuel tank volume, l
LED display
Noise level L (7m)/L , dB
PA WA
Output 12V, A
Engine model
Engine cylinder volume cm
Crankcase volume, l
Engine type
Engine power, hp
Generator parallel socket
Power factor, cos φ
Dimensions (L*W*H), mm
Net weight, kg
Protection class
*Multifunctional LED-display: load, fuel level, voltage, frequency, working hours; overload indicator, voltage
indicator, oil level indicator.
To ensure reliability and increase the engine service life, peak powers may be slightly limited by circuit breakers.
The optimal operating conditions are ambient temperature of 17-25°C, barometric pressure of 0.1 MPa
(760 mm Hg), and relative humidity of 50-60%. Under these environmental conditions, the generator can provide
maximum performance in terms of the declared specifications. In the event of deviations from these environmental
indicators, the generator performance may vary.
Please note that in order to preserve the long service life of the generator, continuous loads of more than 80% of the
nominal power are not recommended.
When starting operating the generator, it's recommended to ground it. Before starting the unit, remember that the
total power of consumers connected should not exceed the rated capacity of the generator.
Manufacturer reserves the right to make changes and/or
improvements in design, components set and technical attributes
without notice and without incurring obligation. The pictures in
this manual are schematical and may not match the parameters
of original product.
3
Nominal voltage tolerance – max. 5%

SPECIFICATIONS

KSB 40i S
230
3.9
3.5
50
17А
2*16А
manual
8.8
multifunctional*
70/95
12V/8A
KSB 240i
223
0.7
gasoline 4 stroke cycle engine
6.1
+
1
610*415*495
38.5
IP23M

TERMS OF USE

www.ks-power.de/en
3
4
| 3