Description; Product Overview; Feature Description/Intended Use; Limitations On Use - Dräger FPS 7000 Instructions For Use Manual

Table of Contents

Advertisement

Available languages

Available languages

Description

2
Description
2.1

Product overview

(see Figure A1 and A2 on page 3)
1
Visor frame, top
3
Sliding buckle
5
Facepiece body
7
Cap
9
Nose cup valve
11 Visor
13 Release button
15 Exhalation valve seat
17 Exhalation valve disk
19 Screw
21 O-ring
2.2

Feature description/intended use

The facepieces of the Dräger FPS 7000 series are part of NIOSH
approved respirators and protect the face and the eyes against
aggressive media.
They may only be used with approved Dräger self-contained breathing
apparatus (see approval label of the respective breathing apparatus).
Otherwise the correct functioning of the device may be compromised.
The facepieces may be used at temperatures from -22 °F to 140 °F
(-30 °C to +60 °C). Lower or higher temperatures are permitted when
the exposure time is short.
6
2
Hairnet
4
Neck strap
6
Flap
8
Visor frame, bottom
10 Nose cup
12 Connection piece
14 Speech diaphragm
16 Spring bridge with spring and
spring guide
18 Inhalation valve
20 Clamping ring
22 Funnel
2.3

Limitations on use

Correct fit of the facepiece can only be achieved if the complete
facepiece seal makes contact with skin. Head hair, facial hair
(including beard stubble and sideburns), earrings, other facial
piercings and normal spectacles will interfere with the facepiece seal
and are not permitted in the sealing area. Use special facepiece
spectacles. Additionally, head hair that could affect the facepiece fit
(buns, pony-tails, hairpieces, etc.) is not permitted!
2.4
Explanation of type-identifying markings and
symbols
The facepieces are differently marked:
Connector
P
Facepiece body
EPDM
Size of facepiece
S (small), M (medium), L (large)
body
Size of nose cup
1 (small), 2 (medium), 3 (large)
Visor
F (fire brigade), EN 166
A (ballistic protection class/190 m/s)
T (ballistic protection at extreme temperatures,
tested at -22 °F to 140 °F (-30 °C to +60 °C)
with 190 m/s)
APECas (coated with scratch-resistant
material)
Hairnet
H
Dräger FPS 7000

Advertisement

Table of Contents
loading

Table of Contents