Software; Further Documentation - Bosch Rexroth IndraControl VAU01.1S Project Planning Manual

2/43 Bosch Rexroth AG | Electric Drives
System Presentation
1.2

Software

1.3

Further Documentation

Rexroth IndraControl VAU01.1S | Project Planning Manual
and Controls
Fig.1-1: View: UPS with serial interface RS232
The communication between UPS and connected control cabinet PC occurs
via the serial interface (XCOM1). Therefore, the UPS software has to be in‐
stalled on the connected device. The installation is described in the documen‐
tation of the control cabinet PC (see
page 2).
The UPS is optionally available with the VPP 21 and the 24 VDC variants of the
VSx devices, which are described in the following documentations:
Rexroth Indra Control VPP 21.1
Rexroth Indra Control VPP 21.2
Rexroth IndraControl VSB 40.1
Rexroth IndraControl VSP 16.1/40.1
Fig.1-2: Further documentation for permitted devices on the VAU01.1S
chapter 1.3 "Further Documentation" on
DOK-SUPPL*-VPP*21.1***-PR03-EN-P
DOK-SUPPL*-VPP*21.2***-PR01-EN-P
DOK-SUPPL*-VSB*40.1***-PR02-EN-P
DOK-SUPPL*-VSP*16/40**-PR03-EN-P