Dismounting - Bosch Rexroth IndraControl VAU01.1S Project Planning Manual

18/43 Bosch Rexroth AG | Electric Drives
Dimensions
5.2.3

Dismounting

Rexroth IndraControl VAU01.1S | Project Planning Manual
and Controls
Determine the distance of the mounting holes according to EN 60715; appendix
B.
On both sides of the UPS end clamps have to be mounted on the top-hat rail
to prevent lateral moving of the UPS during vibration.
Unfixed cables are not permitted. An appropriate fixing (e. g. installation in a
cable channel) and a strain relief of the cables is required.
Attach the UPS on a stable top-hat rail. A not sufficiently stable top-
hat rail may deform during transport, this allows the UPS fall.
In order to unlock the UPS from the top-hat rail, pull the release lever down‐
wards with an adequate tool, see
top-hat rail holders" on page
① Release lever
Fig.5-3: Position of the release lever of the top-hat rail holders
fig. 5-3 "Position of the release lever of the
18.
1