Ce Marking; Declaration Of Conformity; Note For The Machine Manufacturer; Ul/Csa Certified - Bosch Rexroth IndraControl VAU01.1S Project Planning Manual

Project Planning Manual | Rexroth IndraControl VAU01.1S
4.4.2

CE Marking

Declaration of Conformity

Note for the Machine Manufacturer

4.4.3

UL/CSA Certified

Standard
EN 60 068-2-27
EN 60 721-3-1 and
EN 60 721-3-3
Fig.4-5: Angewandte Normen
The electronic products described in the project planning manual comply with
the requirements and goals of the following EC guideline and with the agreed
European standards:
EMC guideline 2004/108/EC
The electronic products described in the project planning manual comply with
the requirements on the operation within the industrial environment:
Standard Title
DIN EN Electromagnetic compatibility (EMC)
61000-6-4
Volume: 6-4: Generic standards - Immunity for in‐
(VDE 0839-6-4) dustrial environments (IEC 61000-6-4:2006)
DIN EN Electromagnetic compatibility (EMC)
61000-6-2
Volume: 6-2: Generic standards - emitted interfer‐
(VDE 0839-6-2) ence for industrial environments (IEC
61000-6-2:2005)
Fig.4-6: Electromagnetic compatibility (EMC) standards
The electronic products described in this project planning manual do not fall
under the machines listed in the EC guidelines. Therefore, explanations are not
required for the 89/392/EMC guideline and do not exist.
89/392/EMC, the EC guideline for machines, specifies the requirements on a
machine. In this guideline, a machine is defined as a combination of the com‐
ponents or mechanisms combined with each other. The described products
belong to the electrical equipment of a machine. Therefore, they are to be in‐
cluded in the declaration of conformity of the machine manufacturer.
The standard EN 60204-1 (safety of machinery, general requirements on the
electrical equipment of the machines) can be used for the electrical equipment
of the machines.
The CE marking is only valid for the device in its delivery status (ex
works). After modifying the device, e.g. after plugging additional
extension cards, CE compliance must be checked.
The devices of the IndraControl VAU01.1S family are certificated according to
Electric Drives | Bosch Rexroth AG
and Controls
Meaning
Shock test
Climatic class
15/43
Technical Data
Edition
September
2007
March 2006