Connecting Procedure - Mitsubishi Electric QA1S6ADP-S1-U-E User Manual

Connecting procedure

1.
Remove the seal over the extension cable connector (IN side) of the QA1S6ADP-S1.
QA1S6ADP-S1
Sticker
2.
Remove the thin-walled part of the extension cable connector (OUT side) of the
QA1S6ADP-S1 using a tool such as a flathead screwdriver (5.575, 6100).
QA1S6ADP-S1
20
Extension
base unit
Extension base unit
Cuts on the
thin-walled part
(two locations)
Flathead screwdriver