4
PART NAMES AND SETTINGS
4.1
Part Names
This section describes the part names of the QA1S6ADP-S1.
(2)
No. Name
(1)
Extension cable connector
(2)
Extension level setting
connector
(3)
Connector for extension base
unit
(4)
Adapter mounting screw (M3) A screw for mounting the adapter on the extension base unit
(5)
Ground cable guide hole
14
(1)
(4)
Application
A connector for sending/receiving signals to/from the main base unit or
another extension base unit. An extension cable is connected here.
A connector for setting the level of the extension base unit
A connector to be connected to the extension cable connector of the
extension base unit
A guide hole for placing the ground cable connected to the FG terminal of
the extension base unit (This hole is used only when the adapter is
mounted on the A1S5B.)
(4)
(4)
(5)
(3)