Replacing The Vacuum Belt - Titan T500 Owner's Manual

MAINTENANCE AND CARE

Replacing the Vacuum Belt

WARNING! To reduce the risk of
electrical shock or injury from moving
parts, turn the vacuum off and unplug
the charger from the charge point before
servicing or cleaning the vacuum.
NOTE: To ensure maximum cleaning
efficiency, the belt should be checked
regularly to be sure it is in good
condition. Check to see if the belt
is stretched, cracked, or if excessive
slipping is occurring. Replace if needed.
• Turn the vacuum off and unplug the
charger from the charge point before
changing the belt.
• Remove the battery (see Removing and
Reinstalling the Battery, page 10).
• Remove the bottom plate (see
Removing and Reinstalling the Bottom
Plate, page 11).
• Remove the brushroll and the worn or
broken belt from the brushroll pulley
and the motor drive shaft.
• Loop the new belt around the motor
drive shaft and the brushroll (Fig. 1).
• Reinstall the brushroll into the nozzle.
Turn the brushroll by hand, making sure
the belt is not twisted and all rotating
parts move smoothly (Fig. 2).
• Reinstall the bottom plate (see
Removing and Reinstalling the Bottom
Plate, page 11).
• Replace the battery (see Removing and
Reinstalling the Battery, page 10).
12
Fig. 1
Fig. 2