Preparations Before Use - Tanita innerScan DUAL Instruction Manual

en

Preparations Before Use

Inserting the Batteries
Note:
・Be sure that the batteries are inserted in the correct orientation. If the batteries are
inserted incorrectly, fluid may leak from the batteries and damage the floor.
・If you do not intend to use this unit for a long period of time, remove the batteries
before storage.
・The included batteries from factory may have decreased energy levels over time.
Changing the Weighing Unit
1.When the power is off, press and hold the button for more than three seconds.
2.Use the button to switch the weighing unit.
3.Press the button.
Note:
If weighing unit is set to pounds or stone-pounds, the height programming mode is automatically set to feet and inches. Similarly,
if kilograms is selected, height is automatically set to centimeters.
Set Your Location Code
Different locations across the world have different gravitational
pulls. These differences affect the accuracy of the weight
measurement. You can obtain the most accurate weight readings by
selecting the correct gravity setting on the monitor according to your
geographical location.
1.When the power is off, press and hold the button.
2.Refer to the map enclosed, and press the buttons to select
your location code.
3.Press the button to enter and save the setting.
Setting the Date and Time
1.Select the year using the
2.Press to confirm.
Set the day and hour in the same way.
The power automatically turns off after displaying the set region, year, month, day and time.
6
and buttons.
SET Display Screen
/ Communication Button
Down
/ Item Select Button
Weight-Only / Off Button
Up / Recall Button