Table of Contents
Advertisement
SETUP AND CONFIGURATION, CONT.
SUP. DEC. AT 0
LED A AND B (on Controller Board)
The 7-segment LED (U6) and the scoreboard will show the current value. If the setting
displayed is acceptable, press the MODE switch to save it and advance to the next
setup parameter.
Otherwise, using the (+) switch to increase the value or the (−) switch to decrease the
value, select the new setting and then press the MODE switch to save it and advance to
the next setup parameter. Values of 0 or 1 may be selected
0: NO = Allows a decimal point after the least significant digit of weight
1: YES = Prevents a decimal point from displaying to the right of the least
significant byte of weight (DEFAULT)
SUP. ANNUNC
LED A, B AND 1 (on Controller Board)
The 7-segment LED (U6) and the scoreboard will show the current value. If the setting
displayed is acceptable, press the MODE switch to save it and advance to the next
setup parameter.
Otherwise, using the (+) switch to increase the value or the (−) switch to decrease the
value, select the new setting and then press the MODE switch to save it and advance to
the next setup parameter. Values of 0 or 1 may be selected
0: NO = No suppression. The annunciator is displayed (DEFAULT)
1: YES = Suppress the annunciator display
26
(SUPPRESS DECIMAL POINT AT LOCATION 0)
(SUPPRESS ANNUNCIATORS – lb, kg, T, t, G, N)
3601-0756-0M Rev D • SB600
Advertisement
Table of Contents
