Shading On Unprinted Sections - Oki C8800 User Manual

Shading on unprinted sections

Possible cause
Paper has been affected
by static electricity.
Paper is too thick.
Toner is low.
Toner rubs off when you rub the printed
surface.
Possible cause
Media Weight and Media
Type settings may not be
appropriate.
Packing materials were left
on the fuser when it was
installed.
Ultra Heavy
If the Ultra Heavy setting does not give proper toner fusion,
you can try the Label settings.
Remedy
Store paper within specified temperature and humidity
levels. See "Specifications" on page
Use recommended paper.
page 11.
Replace toner cartridge.
Cartridge" on page
Remedy
Set the value of media weight in the menu to the
next heaviest one (MEDIA MENU → YYY MEDIA
WEIGHT).
Careful! Fuser my be HOT!
Open the top cover and check to be sure that all the
packing materials were removed from the fuser.
"Replace the Fuser" on page
C8800 User's Guide
145
122.
See "Paper (Print Media)" on
See "Replace a Toner
71.
79.
See