Display Panel Messages - Oki C8800 User Manual

Display Panel Messages___________________

Message
* TONER SENSOR ERROR
ADD MORE MEMORY
420: MEMORY OVERFLOW
CANCELLING JOB
(JAM)
CHECK BELT
330: BELT MISSING
CHECK FUSER
320: FUSER MISSING
CHECK MP TRAY
390: PAPER JAM
Meaning
Flashes across the
second line of the
display: the indicated
color toner (*) is
missing from the
printer.
The document size is
too large for the
printer's memory.
The setting for Jam
Recovery in the menu
has been changed to
off and a paper jam has
occurred. Any
unprinted data is being
deleted.
The belt unit is not
properly installed.
The fuser unit is not
properly installed.
Paper has jammed
while exiting the MP
Tray.
C8800 User's Guide
125
What to Do
Open the top cover and
make sure the indicated
toner is there and
properly seated in the
printer: C = Cyan, Y =
Yellow, M = Magenta, K =
Black.
Reduce the size of the
document. If this happens
frequently, install
additional memory
"Additional Memory
(RAM)" on page 117).
Clear the jam and resend
the missing pages of the
print job.
Open the top cover and
lift out the black (K) and
Yellow (Y) image drums,
placing them on a flat
surface. Check to be sure
that the belt unit latches
are fully in the latched
position.
Then, reinstall the image
drums.
See "Replace the Belt
Unit" on page 82.
Open the top cover and
check to be sure that the
fuser unit is properly
seated in the printer and
that the lock levers are
pushed all the way toward
the back of the printer.
See "Replace the Fuser"
on page 79.
Clear the jam. See "Jam
390" on page 139.
(See