Oki C8800 User Manual page 229

Mac OS 9 / Classic
If you are using a source RGB document, simulate the output
of another printer by making the following selections in the
printer driver:
1. Choose [File] → [Print].
2. From the [Printer] menu, select your printer model.
3. Select [Color Options].
4. Choose [Color Mode] → [Graphic Pro].
5. Choose [Color] → [Graphic Pro 1].
6. Choose [Color Matching Task] → [Printer Simulation].
7. From the [RGB Profile source], select the ICC profile that
corresponds to the device you are trying to match such
as your monitor, scanner or digital camera.
Remember that the names "RGB Source 1", "RGB
Source 2" and so on relate to the number assigned to the
profile using Profile Assistant.
Assistant" on page 222.
8. From the [Simulation Target Profile] menu, select the
profile of the device you wish to simulate.
Remember that the names "CMYK Source 1", "CMYK
Source 2" and so on relate to the number assigned to the
profile using Profile Assistant.
Assistant" on page 222.
If you wish to produce black and gray colors that are
printed using only black toner, enable the [Preserve
Black] option. Although this produces a better quality
print, the black and gray colors will not be simulated
accurately.
9. Choose [Color] → [Graphic Pro 2].
10. From the [Printer Output Profile] menu, select your
printer profile.
If [Auto] is selected, the factory default profiles that are
embedded in the printer will be used. If you have created
a printer profile yourself using profile creation software,
select it here and choose a rendering intent.
C8800 User's Guide
229
See "Using Profile
See "Using Profile