Oki C8800 User Manual page 80

Fuser in Situ.eps
2
2. Locate the fuser (1).
3. Pull the blue fuser lock lever (2) towards the front of the
printer.
4. Hold the fuser by its handle. Lift the fuser out of the
printer. If the fuser is still warm, place it on a flat surface
which will not be damaged by heat. After letting the fuser
cool down, discard it.
5. Remove the new fuser from its packaging. Remove any
packing tape.
6. Push the orange transport lock to the left to release it.
You'll hear it snap. Remove it.
7. Hold the new fuser by the handle. The fuser pressure
release lever (2) should be on the left. Lower the fuser
into the printer.
Fuser Alone.eps
2
1
C8800 User's Guide
80
C
M
Y
K