Oki C8800 User Manual page 83

CAUTION!
The green surface at the base of each image drum is very
delicate and light sensitive.
• Do not touch the green surface.
• Never expose the drum to direct sunlight or to very bright
room lighting.
• Do not expose it to normal room light for more than
5 minutes.
• If the image drum must be out of the printer for longer
than 5 minutes, place the image drum inside a black plastic
bag or carefully place it in a drawer or cabinet to keep it
away from light.
4. Locate the two blue locks (1) and the handle (2).
Belt in Situ.eps
5. Turn the two locks about 45° counterclockwise to release
the belt.
6. Pull up the handle and lift the belt unit out of the printer.
7. Unpack the new belt unit. Hold it with the blue handle
toward the front of the printer.
8. Place the drive gear at the back of the belt unit in the
gear at the right rear corner of the printer. Lower the
belt unit into the printer.
9. Turn the two belt locks about 45° clockwise to secure the
belt unit in place.
5
6
C8800 User's Guide
83