Fx Emulation - Oki C8800 User Manual

FX emulation

This menu controls settings effective when the printer is
operating in FX emulation mode.
Notes:
Factory default settings are shown in
Settings with a dagger (†) only appear when the
appropriate option is installed.
Item
CHARACTER
PITCH
CHARACTER
SET
SYMBOL SET
LETTER 0 STYLE
ZERO
CHARACTER
LINE PITCH
WHITE PAGE
SKIP
CR FUNCTION
LINE LENGTH
FORM LENGTH
TOF POSITION
LEFT MARGIN
FIT TO LETTER
Settings
10 CPI;
12 CPI; 17 CPI;
20 CPI;
PROPORTIONAL
Set 1; Set 2
IBM 437
Disable;
Enable
Normal;
Slashed
6 LPI; 8 LPI
OFF / ON
CR / CR+LF
80 COLUMN;
136 COLUMN
11 inch;
11.7 inch;
12 inch
0.0 inch -
1.0 inch
0.0 inch -
1.0 inch
Disable;
Enable
C8800 User's Guide
Explanation
Specifies character pitch in this
emulation.
Specifies a character set.
Specifies a symbol set.
Specifies the style that replaces 9BH
with letter o and 9DH with a zero
Sets the zero to be slashed or
unslashed.
Specifies the line spacing.
Selects whether blank pages are
printed or not.
Selects whether a received carriage
return character (0Dh) also causes a
line feed.
Specifies the number of characters per
line.
Specifies the length of paper.
Specifies the distance of print from the
top edge of the paper.
Specifies the distance of print from the
left hand edge of the paper.
Sets the printing mode that can fit print
data, equivalent to 11 inches (66 lines),
in the LETTER-size printable area.
107
.
bold