Safety Introductions; Fixture Cleaning - ACME LED-HC50 II User Manual

1. Safety Introductions

Please read the instructions carefully which includes
important information about the installation, operation and
WARNING
Please keep this User Manual for future consultation. If you sell the fixture to
another user, be sure that they also receive this instruction booklet.
Unpack and check carefully there is no transportation damage before using the
fixture.
Before operating, ensure that the voltage and frequency of power supply match
the power requirements of the fixture.
Disconnect mains power before servicing and maintenance.
Use safety chain when fixes this fixture.
In the event of serious operating problem, stop using the fixture immediately.
Never try to repair the fixture by yourself. Repairs carried out by unskilled people
can lead to damage or malfunction. Please contact the nearest authorized
technical assistance center. Always use the same type spare parts.
Do not touch any wire during operation and there might be a hazard of electric
shock.
To prevent or reduce the risk of electrical shock or fire, do not expose the fixture
to rain or moisture.
There are no user serviceable parts inside the fixture. Do not open the housing
or attempt any repairs by yourself. In the unlikely event your fixture may require
service, please contact your nearest dealer.
LED-HC 50 II
maintenance.
2A

9. Fixture Cleaning

The cleaning of internal must be carried out periodically. Cleaning frequency
depends on the environment in which the fixture operates: damp, smoky or
particularly dirty surrounding can cause greater accumulation of dirt.
Clean with soft cloth using normal glass cleaning fluid.
Always dry the parts carefully.
Clean the external at least every 20 days.
LED-HC 50 II
11A