Figure 3-16: LGW = Router
3.7.4.3 Static Routing
When using static routing, go to Network > Static Routing. The Network > Static Routing landing
page has two main sections, Static Routing Config and Validated Route List (Figure 3-17). The
configured static route information are displayed under Static Routing Config. To edit a static route
in the list, click on the
edit icon, enter the information, and click OK. To add a static
Add icon. Fill in the information and click OK. Field descriptions are in
route, click the
Table 3-3.
Figure 3-17: Static Routing
28