Figure 3-2: Attach Bracket To Pole; Figure 3-3: Attach Enb To Bracket; Figure 3-4: Completed Installation - Baicells Nova430i Installation Manual

1. Place the bracket on the pole and tighten the hex nuts on the mounting clamps
(Figure 3-2).
NOTE: The arrow must be pointing upward.

Figure 3-2: Attach Bracket to Pole

2. Using the two pins on the bracket on the back of the eNB, attach the eNB to the mounting
bracket on the pole. Push the eNB until the hook is firmly attached to the mounting bracket
(Figure 3-3).

Figure 3-3: Attach eNB to Bracket

3. Tighten the bolt on the top of the bracket using a Phillips-head screwdriver to complete
the installation (Figure 3-4).

Figure 3-4: Completed Installation

4. After installation is complete, adjust the eNB to a proper angle by tilting.
15