Figure 3-15: Lgw; Table 3-2: Lgw - Baicells Nova430i Installation Manual

Field Name
MTU
DNS Address 1
DNS Address 2
WAN Config
IP Access Mode
Current IP
Option60
Subnet Mask
Prefix
Gateway
VLAN ID
3.7.4.2 LGW
The Local GateWay (LGW) setting must be configured when using the Baicells CloudCore Evolved
Packet Core (EPC). Refer to Figure 3-15 and Table 3-2. You must reboot the eNB when you make
changes to these settings.

Figure 3-15: LGW

Table 3-2: LGW

Field Name
LGW
Description
Used to specify the maximum size of the network layer protocol data unit
that can be communicated in a single network transaction. Range is 700
to 1600.
Used to define the DNS 1 IP address
Used to define the DNS 2 IP address
Used to enable the interface. Four IP addresses are the maximum number
the eNB supports.
Used to select the desired interface protocol: DHCP, Static IP, IPv6 DHCP,
or IPv6 Static IP
The WAN interface IP address
Used to differentiate between different terminal when IP Access Mode is
set to DHCP
Used to define subnet mask address if IP Access Mode is set to Static IP
Prefix of IPv6 address for WAN interface if IP Access Mode is set to IPv6
Static IP
Used to define gateway address if IP Access Mode is set to Static IP
Used to configure more IP addresses for the WAN interface through the
VLAN when there is a need to transmit multi-types of data.
Description
On or Off
26