Basic Configuration Overview; Configure Network Interfaces; Figure 3-13: Configuration Flow - Baicells Nova430i Installation Manual

Outdoor 4x250mw two-carrier tdd enodeb
Hide thumbs Also See for Nova430i:
Table of Contents

Advertisement

3.7.3 Basic Configuration Overview

Figure 3-13 indicates four main steps for basic configuration: network interfaces, management
server address, quick settings pertaining to key LTE parameters, and the carrier setting.

Figure 3-13: Configuration Flow

3.7.4 Configure Network Interfaces

The network interfaces defined as part of the initial, basic setup include the WAN/LAN/VLAN
interfaces, Dynamic Host Configuration Protocol (DHCP), and the Local Gateway (LGW) mode.
3.7.4.1 WAN/LAN/VLAN
Go to the Network > WAN/LAN/VLAN menu (Figure 3-14). The WAN interface is an external
communication portal (Internet connection) between the eNB's Network Management System
(NMS) – in most cases, the CloudCore OMC – and the Mobility Management Entity (MME). If not
using CloudCore, the eNB's NMS may be a Local OMC or the LTE NMS. The WAN/LAN/VLAN fields
are described in Table 3-1.
24

Advertisement

Table of Contents
loading

Table of Contents