Table of Contents
Advertisement
Figure 2-3: CloudCore Login Page
Installation
3
3.1 Process Overview
Figure 3-1 provides an overview of the installation process.
Figure 3-1: Installation Process Overview
3.2 Install eNB on Pole or Wall
3.2.1 Install on Pole
The eNB mounting bracket is assembled in manufacturing before packing. The only action required
by the installer is to attach the assembly to the pole.
Check to ensure the diameter of the pole is in the range of 1.6–2.8 in (40–70 mm). The position of
the eNB on the pole should be at least 47 in (120 cm) in height. Follow the steps below to install
the Nova430i eNB on a pole.
You will receive an email from Baicells. Click on the CloudCore link
to go to the login page.
Enter your login user name (email address) and password to
authenticate.
14
Advertisement
Table of Contents
