Baur PD-TaD 62 User Manual page 80

Full MWT PD-TaD 62
Main view
The main view is the measurement mode window in which all measured values are
continuously displayed.
Diagram tan  versus voltage (for the ramp-up stage)
In the diagram the determined average tan δ values per phase are shown in dependence of
the voltage.
The threshold values for tan d are displayed by dotted lines as follows:
a - Alarm level Cancel
c - Alarm level High risk
w - Alarm level Risk
Diagram tan  versus time (for the MWT stage)
The diagram shows tan δ values in dependence of the test time.
80 / 114 822-187-3