Page 1
TVM 1210 Series TVM 1410 Series TVM 1610 Series Full Installation Guide Everything you need to get your TV safely on the wall, in no time Before you start …we just wanted to say thanks for choosing Vogel’s. Smart choice.
Page 2
Stay safe Warning Always read these safety instructions carefully before installing and using this product. Following these instructions is strictly required. Incorrect mounting and/or installation could put you, your TV, and your family at substantial risk. Don’t dare risk it… Read all Vogel’s recommends that the mounting and/or installation of this product should be carried out by a suitably qualified expert.
Page 4
Got your tools ready? Don’t start without all the necessary tools: Crosshead screwdriver Drilling machine 8mm or 5/16” concrete/brick drill (for concrete/brick walls only) 4mm or 5/32” wood drill (for wooden walls only) Stud finder (optional) Socket wrench Pencil Take care of your safety Who cares about looking cool? Always wear personal protective equipment: Eye protection Ear protection...
Page 5
Ready… set… get installing! Step 1: Attach the strips to the TV 1. Put the TV carefully on a clean surface without any obstacles. 2. Screw the strips Ⓒ on to the TV with the bolts Ⓔ. Make sure the strips Ⓒ are at the same height and do not stick out. 3.
Page 6
Step 2: Attach the wall mount to the wall How well do you know your walls? What they’re made of matters more than you think… Concrete/Brick wall Don’t drill yet! Try our free DrillRight™ AR app to find just the right height and mark the first hole, easily. 1.
Page 7
How deep do you drill? Check the length of the screw (not the plug!) to find the right depth – this stops things from breaking. 3. Attach the wall mount Ⓐ to the wall with the screws Ⓗ, washers Ⓙ and plugs Ⓘ. Use the spirit level to level the wall mount.
Page 8
Wooden wall with studs TVM 1200 and TVM 1210 Series are not suitable for mounting on stud walls, without special mounting material. Ask your installer, specialist supplier or the Vogel’s Consumer Care team at www.vogels.com/contact for more information. Don’t drill yet! Try our free DrillRight™ AR app to find just the right height and mark the first hole, easily.
Page 9
Don’t destroy your belongings! The wall mount must always be attached to the studs. 3. Now for the fun part… drilling the holes. 4. Attach the wall mount Ⓐ to the wooden wall with the screws Ⓗ and washers Ⓙ. Use the spirit level to level the wall mount.
Page 10
Other wall type/I don’t know my wall type If your wall is a little special – for example, hollow bricks, metal stud walls, wood panels or plasterboard – or you simply aren’t sure, don’t worry! Just ask your installer, specialist supplier or the Vogel’s Consumer Care team at www.vogels.com/contact.
Page 11
Having a cable mess? Do you need inspiration about how to hide and guide your cables or how to place other TV accessories? Take a look at our website vogels.com! Removing your TV 1. Remove the TV, and put it down somewhere safe. Again, lifting your TV is a two-person job.
– it can be service kit, and we’ll send everything you need. hard to keep up sometimes. So, Click here to contact Vogel's Consumer Care. it might be the case that the correct bolt size is not included… you’re just too advanced! ‘I have a lot of leftover...
Page 14
Go green! We care about the planet. If you’re getting rid of the packaging or the TV mount itself, please visit your local recycling facility, or contact your municipal office. Recycling matters! Guarantee Thanks again for choosing Vogel’s! Just like every product we make, your new purchase is made of durable materials and is based on a meticulous design.