Recording A Backcountry Skiing Activity; Cross-Country Skiing Power Data; Recording A Bouldering Activity - Garmin FORERUNNER 955 Owner's Manual

Table of Contents

Advertisement

Recording a Backcountry Skiing Activity

The backcountry skiing activity lets you manually switch between climbing and descending tracking modes so
you can accurately track your statistics.
1 Press START.
2 Select Backcountry Ski.
3 Select an option:
• If you are starting your activity on a climb, select Climbing.
• If you are starting your activity moving downhill, select Descending.
4 Press START to start the activity timer.
5 Press
to switch between climbing and descending tracking modes.
6 After you complete your activity, press STOP, and select Save.

Cross-Country Skiing Power Data

You can use your compatible Forerunner device paired with the HRM-Pro
feedback about your cross-country skiing performance.
NOTE: The HRM-Pro accessory must be paired to the Forerunner device using ANT
Power is the force you generate while skiing. The power output is measured in watts. Factors that affect power
include your speed, elevation changes, wind, and snow conditions. You can use power output to measure and
improve your skiing performance.
NOTE: Skiing power values are generally lower than cycling power values. This is normal and occurs because
humans are less efficient at skiing than they are at cycling. It is common for ski power values to be 30 to 40
percent lower than cycling power values at the same training intensity.

Recording a Bouldering Activity

You can record routes during a bouldering activity. A route is a climbing path along a boulder or small rock
formation.
1 Press START.
2 Select Bouldering.
3 Select a grading system.
NOTE: The next time you start a bouldering activity, the watch uses this grading system. You can hold
select the activity settings, and select Grading System to change the system.
4 Select the difficulty level for the route.
5 Press START to start the route timer.
6 Start your first route.
7 Press
to finish the route.
8 Select an option:
• To save a successful route, select Completed.
• To save an unsuccessful route, select Attempted.
• To delete the route, select Discard.
9 When you are done resting, press
10 Repeat this process for each route until your activity is complete.
11 After your last route, press STOP to stop the route timer.
12 Select Save.
8
to start your next route.
accessory to provide real-time
technology.
®
Activities and Apps
,

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents