122 | Drystar 5301 XL, Drystar 5302 XL | Problem solving
Error messages while the printer starts up
The table below lists the possible error messages, which can appear on the
display of the control panel while the printer starts up.
Error message
ERROR display failure (Firmware)
ERROR system failure
ERROR self test failure (Firmware)
After starting up the printer, it performs a selftest. A progress indicator will
show the proceeding of this self test. During the self test, a number of
messages can appear, meaning that the selftest has failed.
Related Links
Checking error messages
3730D EN 20210520 0952
Note: Contact your local service organization in case the selftest
fails.
Note: Error messages can also appear when the printer has
already started up.
on page 106
Cause of error
'Display self test failed'
'System self test failed'
'Software self test failed'