AGFA Drystar 5301 XL Reference Manual page 77

Drystar 5301 XL, Drystar 5302 XL | Advanced Operation (key-operator mode) | 77
1. Press the Confirm key to continue or press the Escape key to skip this step.
The 'Enter daily used Modality name' screen is displayed:
2. Enter the daily used modality name (nickname) by means of the arrow
keys. The nickname is limited to 8 characters.
3. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
The 'Select modality brand name' screen is displayed:
4. Press the up/down arrow keys to select the appropriate modality brand
name.
If you have selected 'Default profile', the modality AE-title will be linked
with the default settings. Proceed with step 7.
5. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
The 'Select modality type' screen is displayed:
6. Press the up/down arrow keys to select the appropriate modality type.
7. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
The 'Enter modality AE-title' screen is displayed.
8. Enter the modality AE-title by means of the arrow keys.
The modality AE-title is limited to 16 characters.
9. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
The 'Select preferred FILM TYPE for' screen will appear:
10. Press the up/down key to select the preferred film type for this modality.
If the current film type in the trays does not match the selected film type,
the following message is displayed:
3730D EN 20210520 0952