Persistent White Dots Or Lines Appear In The Transport Direction - AGFA Drystar 5301 XL Reference Manual

128 | Drystar 5301 XL, Drystar 5302 XL | Problem solving
• In case these artifacts are visible:
• In case there are no artifacts:
2. If the image quality is not OK, call service.
Related Links
Changing the image quality settings

Persistent white dots or lines appear in the transport direction

If fine white dots and one or more fine white lines appear in the transport
direction (mostly due to dust infiltration), try the following remedies:
1. Clean the print head resistor line.
2. Print a few test sheets using the 'Print test image' function.
If the white lines are still visible, contact your local service organization.
Related Links
Printing test images
3730D EN 20210520 0952
1. Clean the print head.
2. If the image quality is not OK, perform a film calibration.
1. Perform film calibration.
on page 47
on page 37