AGFA Drystar 5301 XL Reference Manual page 42

42 | Drystar 5301 XL, Drystar 5302 XL | Advanced Operation (key-operator mode)
• If you select "Cubic Hi-Res" the following screen will appear, allowing
• If you select "CubicBell", the following screen will appear, allowing
7. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
Related Links
Controlling the printer via a remote PC (with browser)
Accessing the Change settings menu
Data entry
Removing a modality
Adding a modality
Changing Image quality settings for a modality - Changing the
maximum density (Dmax)
1. On the Change settings menu, press the Down key four times, followed by
the Confirm key to select 'Image quality'.
The following screen will appear:
2. Press the Up/Down key, followed by the Confirm key to select the modality
for which you want to change the Image quality settings.
The 'Image quality' screen for the selected modality is displayed:
3. Do one of the following:
3730D EN 20210520 0952
you to adjust the smoothing factor:
Enter the smoothing factor value by means of the arrow keys. (valid
range [-5.00, 0.00]).
you to adjust the smoothing factor:
Enter the smoothing factor value by means of the arrow keys. (valid
range [0.10, 1.00]).
WARNING:
The user should be aware that the interpolation values differ
when the A#Sharp feature is deactivated. The A#Sharp feature,
which is a technology that enhances the image sharpness, is
active by default. For more information about (de)activating the
A#Sharp feature, refer to the Service manual.
on page 12
on page 34
on page 34
on page 80
on page 23