Positioning The Rad Wall Stand - AGFA DR 400 User Manual

98 | DR 400 | Operation

Positioning the RAD Wall Stand

1
Vertical movement handle with brake switch
1.
Tilting angle scale
2.
Tilting handle
3.
Figure 39: Positioning controls
Vertical movement
To release the brake for vertical movement, press the switch that is integrated
at the upper side of the handle located at the left and right side of the RAD
Wall Stand. The bucky can be moved up and down.
To stop movement and lock the bucky into position, release the switch.
3231A EN 20150710 1114
Warning: Maintain visual contact with the patient while
moving the equipment close to the patient in order to detect
hazardous situations (e.g. collisions) early and to avoid
them.
Warning: Make sure that no persons or objects are within
the movement area of the system where they can collide
with moving parts of the system.
Warning: Be careful not to squeeze your finger or hand.
Keep your hands at the handles while positioning the
system.
2 3