Maintenance And Repair; Cleaning And Servicing - Bosch Rexroth MAD100 Operating Instructions Manual

MAD / MAF Asynchronous Housing Motors
8

Maintenance and repair

8.1

Cleaning and servicing

Motors
Connection cable
WARNING
Work required on the electric system may only be carried out
by skilled electricians. Tools for electricians (VDE tools) are
absolutely necessary.
Prior to commencing work:
1. Isolate (even auxiliary circuits).
2. Secure against reactivation.
3. Ensure de-energization.
4. Ground and short-circuit.
5. Cover or shield any adjacent live parts.
WARNING
Never do any maintenance work on life machines.
While carrying out maintenance work, secure the machine
such that it cannot restart or be used by unauthorized per‐
sons.
CAUTION
Before you work in the machine, let the motor cool down.
Wear safety gloves.
Do not work on hot surfaces.
Excessive dirt, chips or dust can negatively influence the motor functions. In
extreme cases lead to motor loss. Clean the cooling fins of the motors at reg‐
ular intervals (after one year at the latest) to reach a sufficiently high heat
emission surface. If the cooling fins are partially covered with dirt, sufficient
heat dissipation via the ambient air is no longer ensured.
WARNING
Immediately put the machine out of operation and replace
defective connection cables.
Never do any provisional repairs on the connection cables.
● Check in regular distances the connection cables on damage and re‐
place them if necessary.
● Check optionally existing drag chains (Drag chains) on defects.
● Check the protective conductor connection for proper condition and firm
seating at regular intervals. Replace it, if necessary.
Maintenance and repair
Danger! Electric voltage! Operations in the vi‐
cinity of live parts are extremely dangerous.
Personal and material damage during main‐
tenance work in operation!
Hot surfaces with temperatures over 70 °C
may cause burns!
Death by electrocution possible due to live
parts!
R911336186_Edition 02 Bosch Rexroth AG
37/57