To Send All Schedule Keeper Or Expense Mode Data In A Specific Period - Casio SF-4900ER User Manual

PART 6 Data Communications
5. Press to start the send operation or
SET
sending anything.
To abort the send operation at any time, press
If an error occurs during the send operation, the message "TRANSMIT
ERROR!'' appears on the display. Press
6. After the send operation is complete, the display returns to the initial screen
of the mode you were in when you started this procedure.
To send all Schedule Keeper or Expense Mode data in a
specific period
1. Select the Schedule Keeper or Expense Mode date that starts the period you
want to send.
2. Press
FUNC
In the Expense Mode, you should press
You can perform the following operation while in the open memory area or
the secret memory area.
3. Press to select DATA COMM.
4
4. Press to select SEND.
1
5. Press to select MODE DATA.
2
At this time, both the start date and the end date for the period are the same
as the date you selected in step 1.
6. Using the H and J keys to move the cursor, input the starting and ending
date of the period.
To send the data from January 1, 2000 to April 1, 2000, for example, press
J to move the cursor under the month (2000/1/1) and press
7. After you specify the ending date, press
8. Press to start the send operation or
SET
sending anything.
To abort the send operation at any time, press
This operation does not send Reminder Mode data listed under a Schedule
Keeper date. Use the procedure on page 103 to send all Reminder Mode data
item.
104
twice to display the second function menu.
to abort the operation without
ESC
.
ESC
to clear the error message.
ESC
three times.
FUNC
Date selected in
step 1 above
.
TIME/DATE
to abort the operation without
ESC
.
ESC
.
4