Notes
Any decimal values produced by a calculation result are handled in accord-
ance with the decimal value setting you make using the procedure under "To
specify decimal value handling".
Pressing an arithmetic key (+, –,
switches to the Calculator Mode with the conversion result part of the
calculation.
Pressing
CAL/CONV
conversion clears the display to zero.
Pressing
CAL/CONV
Mode with the calculated result ready for conversion.
To change the currency name and rate
Example
To specify an exchange rate of $1 (dollar) = 1.1825 DEM
1. Enter the General Conversion Mode.
2. Use K and L to move the cursor to £ (pounds), and then press
3. Press
to select SETTINGS.
1
4. Input "DEM", and then press
Using the General Conversion Mode
#
$
,
in the Conversion Mode immediately after performing a
in the Calculator Mode changes to the Conversion
.
SET
) immediately after a conversion
.
FUNC
87