Controlling The Number Of Displayed List Columns; Clearing All Stat Editor Data - Casio ClassPad 330 User Manual

Classpad os version 3.03

Hide thumbs Also See for ClassPad 330:

Table of Contents

Controlling the Number of Displayed List Columns

You can use the following procedures to control how many list columns appear on the

Statistics application window. You can select 2, 3, or 4 columns.

u To specify the number of columns for the list display

On the Stat Editor window, tap S (two columns), D (three columns) or F (four columns)

to specify the width. You will need to tap the arrow button on the right end of the toolbar to

see the icons.

• You can also specify the number of display cells using the [Cell Width Pattern] setting on the

[Special] tab of the Graph Format dialog box (page 1-9-6).

• When you have the Stat Editor window displayed along with a second window, you can make the

Stat Editor window active and then tap the r button on the icon panel to expand the Stat Editor

window to fill the entire display. For more information, see "Using a Dual Window Display" on

Use the following procedure to initialize the Stat Editor and clear all currently displayed data.

Following this procedure, the Stat Editor shows six empty lists, named list1 through list6.

• Performing the following procedure clears all the data from Stat Editor window list1 through

list6 and any additional lists currently in memory.

u To clear all stat editor data

(1) On the Stat Editor window, tap [Edit] and then [Clear All].

(2) On the confirmation dialog box that appears, tap [OK] to clear the all list data or [Cancel]

to cancel the clear operation.

• After you tap [OK], the Stat Editor window shows six empty lists (three lists visible on

the ClassPad display at a time), named list1 through list6.

Using Stat Editor