PART 3 Data Management Functions
Editing, Deleting and Copying data
To edit a data item
1. Enter the mode you want to edit a data item.
2. Use index
search
you want to edit.
3. Move the entry of the data item you want to edit into the top line (second line
in the Schedule Keeper Mode and the Expense Mode) of the index display.
At this point, you may want to switch to the full data display by pressing
. The following steps are the same regardless of whether you are
DISP CHNG
continuing from the index display or the data display.
4. Press
FUNC
In the Expense Mode, you should press
5. Press
to select ITEM EDIT.
1
To clear the function menu without selecting anything, press
6. Make any changes you want.
To cancel the editing operation without making any changes, press
or
.
CLEAR
7. After making the changes you want, press
new changes.
To delete a single data item
1. Enter the mode you want to delete a data item.
2. Use index
search
item you want to delete.
3. Move the entry of the data item you want to delete into the top line (second
line in the Schedule Keeper Mode and the Expense Mode) of the index
display.
4. Press
FUNC
In the Expense Mode, you should press
5. Press
to select ITEM DELETE.
2
To clear the function menu without deleting anything, press
6. Press
to clear the data item you selected or
SET
without deleting anything.
Remember that the delete operation cannot be undone.
62
, initial character
.
, initial character
.
, or mode
search
search
twice.
FUNC
to store the data item with its
SET
, or mode
search
twice.
FUNC
ESC
to find the data item
.
ESC
ESC
to find the data
search
.
ESC
to abort the operation