To Set Or Change A Schedule Alarm For An Existing Data Entry; To View A Data Entry's Current Schedule Alarm Setting; To Delete A Specific Schedule Alarm - Casio SF-4900ER User Manual

PART 3 Data Management Functions
If you attempt to set a schedule alarm time that is already set for another data
entry, the message "ALARM TIME ALREADY USED!'' appears on the
display. Press

To set or change a schedule alarm for an existing data entry

1. Enter the Schedule Keeper and recall the data for which you want to set or
change a schedule alarm. Press
press to select ITEM EDIT.
1
2. Press
NEXT
3. Input the schedule alarm time. Use the H and J cursor keys to move
between the hour and minutes setting.
Whenever the schedule alarm setting is shown on the display, pressing
clears the alarm time and displays the prompt "ALM TIME?". Input the alarm
time using the same procedure described above.
4. After inputting the data, press
Note that the schedule alarm setting is cleared from the display when you
press .
SET

To view a data entry's current schedule alarm setting

1. Enter the Schedule Keeper and recall the date whose schedule alarm setting
you want to view.
2. Press
NEXT
for all entries stored under the date you are viewing.
3. Use K and L to scroll through the entries and view the alarm times.
4. To clear the schedule alarm times, press

To delete a specific schedule alarm

1. Enter the Schedule Keeper and recall the data for which you want to delete
the schedule alarm. Press
to select ITEM EDIT.
1
2. Press
NEXT
3. Press to delete the currently set schedule alarm time.
DEL
4. After deleting the alarm time, press
44
, J or H to display the schedule alarm to change it.
ESC
until the cursor moves to the Schedule Alarm time.
SET
to switch the index display to show the schedule alarm settings
FUNC to display the function menu and then
(or L) until the schedule alarm time appears.
to display the function menu and then
FUNC
to store it into memory.
again.
NEXT
to store the entry into memory.
SET
DEL
press