NEC DS1000 Feature Handbook page 195

User Programmable Features
To program a feature, press # and the feature's code. For example, to enable incoming Paging, press # and dial V P Y , then SPK to
hang up. By default, Call Forwarding Clear All, System Speed Dial, and Time and Date are only available to the attendant.
Feature
Call Forwarding Clear All
Headset Mode
Hotline
Off Hook Signaling
Paging (Incoming)
Prime Line Assignment
Programmable Function
Key Assignments
Programmable Function
Key Ringing
Programmable Idle Menu
Soft Keys (Super Display)
Ringing Line Preference
Speed Dial, Personal
Speed Dial, System
System Program Access
Time and Date
Intercom Voice Announce
(for incoming Intercom calls)
User Programmable Features
Mnemonic Numeric
#CC #22
#HS #47
#HL #45
#OHS #647
#VP #87
#PLA #752
#KP #57
#RAC #722
#RAL #725
#RAP #727
#SM #76
#RLP #757
#SP #77
#SP #77
#*#*
#TD #83
#VA #82
+ Y to clear (cancel) forwarding or N to exit without clearing +
#CC
SPK to hang up.
#HS + Y to enable or N to disable + SPK to exit.
#HL + Press flashing Hotline key + Enter extension for new Hotline
partner + HOLD + Program another Hotline key or SPK to exit.
+ Select mode ( C =Outside line, I =ICM, D =Hotline) + Select
#OHS
option (see below) + SPK to exit.
Outside line options: C =Camp On tone, O =Off Hook Ringing, 0 = None
Intercom options: C =Camp On, V =Voice Over, 0 =None
Hotline Options: C =Camp On, V =Voice Over, 0 =None,
#VP + Y to enable or N to disable + SPK to exit.
#PLA + Press one of your flashing programmable keys or ICM +
to exit.
SPK
#KP + Press key you want to program + HOLD + ICM + Press VOL
▲ or VOL ▼ to select key option + HOLD + (Enter any additional
1
data if required + HOLD ) + Press VOL
key to program, or CONF + SPK to exit.
1
To set up a Night (System Mode System) key, press CLEAR instead
of entering additional data.
Call Coverage Keys: #RAC + Call Coverage Key repeatedly to select
ringing mode + SPK to exit.
Call Coverage Keys flash as follows: Lamp only=On red, Immediate
ring=On green, Delay ring=Fast flash green.
Outside Line Keys: #RAL + Line Key repeatedly to select ringing
mode + SPK to exit.
Line keys flash as follows: Lamp only=On red, Immediate ring=On
green, Delay ring=Fast flash green, Night ring=Slow flash green.
Group Call Pickup Keys: #RAP + Group Call Pickup Key repeatedly
to select ringing mode + SPK to exit.
Group Call Pickup Keys flash as follows: Lamp only=On red, Imme-
diate ring=On green, Delay ring=Fast flash green.
Press the soft key you want to program (or press Vo l
scroll through the keys) + HOLD + ICM + Vol
key option + HOLD + CONF + SPK to exit.
#RLP + Y to enable or N to disable + SPK to exit.
#SP + Press bin key (for bins 701-710) or DIAL then bin key (for bins
711-720) + HOLD + Dial outside line (e.g., 1), Line group (e.g., 90-
98), or ICM for Intercom feature + HOLD + Number to store + HOLD
twice + Name + HOLD + Press another bin key or SPK to exit.
#SP + Dial System Speed Dial bin number (e.g., 200) + HOLD +
Dial outside line (e.g., 1), Line group (e.g., 90-98), or ICM for Inter-
com feature + HOLD + Number to store + HOLD twice + Name +
HOLD + Dial another System Speed Dial bin or SPK to exit.
#*#* + Enter programming password.
#TD + Enter time in 24-hour clock using hours (2 digits), minutes (2
digits) and seconds (2 digits) + HOLD + Enter date using month (2
digits), day (2 digits) and year (4 digits) + HOLD + SPK to exit.
#VA + V for voice announce or R for ring + SPK to exit.
Operation
▲ or VOL ▼ to select another
▲ or Vol
▲ or Vol ▼
▼ to
to select
187