Account Codes
4.
(Outgoing call only) Dial your outside number.
To enter a Forced Account Code:
1.
Access a line for an outside call (any method you prefer).
2. Enter your Account Code (up to 10 digits, using 0-9).
3. Dial
Account Code Programmable Function Key.
4.
Dial your outside number.
Using Account Codes with Store and Forward
To place an outside call when both Store and Forward and
Forced Account Codes are enabled:
1.
Press
Press Switched Loop key + Dial line group number (0-8).
Press Fixed Loop key.
2.
Dial number + Wait for 3 beeps + Enter Account Code.
3.
Wait 6 seconds, dial
2
You hear three beeps indicating that you must
enter an Account Code.
If your system uses Verified Account Codes, you
must enter a code that is stored in your system.
ACCT
, press
Your Communications Manager can tell which
options are available to you.
If Forced Account Codes are enabled only for long
distance calls and you are placing a local call, do not
enter an Account Code. Just dial the call normally.
+ Dial
ACCT CODE
/
(or optionally 90-98).
OR
OR
, or press
, or press your
ACCT
ACCT CODE
/
.