Name Programming - NEC DS1000 Feature Handbook

Program your extension's
name from your telephone.
play. If you are an attendant, you may also be able to program a
co-worker's name as well as the name for a ring Group or UCD
Hunting Group. Check with your Communications Manager.
To program your extension's name:
1. At a 22- or 34-Button Display Telephone:
Press
At a Super Display Telephone:
Press
2. Follow the instructions in the Name Programming chart
on the next page.
3. Press
To program a name for a co-worker's extension:
1. At a 22- or 34-Button Display Telephone:
Press
At a Super Display Telephone:
Press
2. When you see
sion you want to program +
PGM MORE
+
PROGRAM
+
You must have Access Level 4 or 5 to do this.
PGM MORE
+
PROGRAM
EXT:3xx
You can optionally enter a Ring Group or UCD
Group master number to program the name of the
associated group.

Name Programming

You can customize your exten-
sion's name. When you place an
Intercom call, the name you enter
shows on your co-worker's dis-
MORE
+
NAME
+ .
to exit.
MORE
+
NAME
+ .
, enter the number of the exten-
HOLD
NAME
+ .
NAME
+ .
.
139