Table of Contents
Advertisement
2-4-5. CN-1753 Board
2-4-5. CN-1753 Board
n
CN-1753 board is applicable to only the unit
which serial No. is 10001 through 10052.
Removal
1. Turn off the power and wait for more than 30
seconds.
2. Remove the upper lid. (Refer to Section 1-6.)
3. Free the harness 1 from clamper 1.
4. Disconnect the harnesses 1 ,2 and 3 from
the connectors on the CN-1753 board.
5. Unscrew the five screws and remove the fan
shield plate.
6. Move the CN-1753 board in the direction of
the arrow and remove it.
2-36 (E)
PWH3 x 5
Fan shield plate
Harnness3
IF-715 board
PWH3 x 5
Harnness1
Harnnesses2
PSW
3 x 5
CN-1753 board
Connector(4P)
Clamper1
BKNW-116
Advertisement
Table of Contents
