2-3. Replacement of Power Supply Unit
2-3-2. In the Case of One Power-Cooling-Fan
Outline
1. Removal of upper lid
2. Removal of fan bracket
3. Removal of harness
4. Removal of SW cover
5. Removal of power supply unit
6. Installation of power supply unit/SW cover
7. Connection of harness
8. Attachment of fan bracket
9. Attachment of upper lid
Preparation
1. Turn off the power and wait for more than 30 seconds.
2. Pull out the power cord from AC outlet.
c
Turn off the power and wait till a heat up device cools when replacing HDDs or its
peripheral parts.
2-20 (E)
BKNW-116