Table of Contents
Advertisement
2-4-2. SE-378 Board
8. Unscrew the six screws which is fixing the
transistors on the SE-378 board.
9. Unscrew the eight screws marked with
and remove the SE-378 board from the HDD
sub bracket.
Installation
1. When installing the new SE-378 board,
unsolder and remove the harness.
n
The removed harness here is not re-used.
2-30 (E)
B2.6 x 5
B2.6 x 5
B2.6 x 5
Transisitors
B2.6 x 5
SE-378 board
B2.6 x 5
B2.6 x 5
Transisitors
SE-378 board
HDD sub bracket
Hard disk drives
Unsolder
Harness
BKNW-116
Advertisement
Table of Contents
