Power Management Settings (Power Manager) - NEC PlasmaSync 42PD3 User Manual

Press the EXIT button 2 times
4
Press the EXIT button one time to return to the main menu.
One further press removes the menu.
* Aligning the cursor with [ALL RESET] and pressing the PRO-
CEED button will return all the settings of the other functions
to the default settings.
Other Functions (OTHER SETTINGS)

Power Management Settings (POWER MANAGER)

This sets the functions that serve to automatically reduce power
consumption.
Set [OSD MODE] to [PRO] on the configuration menu, then per-
form the following operations.
Preparation Press the PROCEED button to display the main
menu.
Align the cursor with
1
Move the cursor left and right with
the POSITION/CONTROL
buttons.
2 Align the cursor with POWER MANAGER
Move the cursor up and down with
the POSITION/CONTROL LM
buttons.
Set the power management mode with
3
the POSITION/CONTROL
[ON] : Power management function operates.
[OFF] : Power management is cancelled.
Press the EXIT button 2 times
4
Press the EXIT button one time to return to the main menu.
One further press removes the menu.
* Aligning the cursor with [ALL RESET] and pressing the PRO-
CEED button will return all the settings of the other functions
to the default settings.
COLOR SYSTEM : AUTO
P-ON MODE : LAST MEM
POWER MANAGER : OFF
SET ID NO : ALL
RGB3 ADJUST : 1
CINEMA PULLDOWN : ON
STD/CINEMA : STD
ALL RESET
COLOR SYSTEM : AUTO
P-ON MODE : LAST MEM
POWER MANAGER : OFF
SET ID NO : ALL
RGB3 ADJUST : 1
CINEMA PULLDOWN : ON
STD/CINEMA : STD
ALL RESET
buttons
P M
LASMA ONITOR
†
41