Table of Contents
Advertisement
Other Functions (OTHER SETTINGS)
Cinema Pulldown Setting (CINEMA PULLDOWN)
This function sets the cinema pulldown in conjunction with the video
information that is recorded on the DVD software. This is valid only for
NTSC, PAL, and 480I (60 Hz) signals. Set [OSD MODE] to [PRO] on
the configuration menu, then perform the following operations.
Preparation Press the PROCEED button to display the main
menu.
Align the cursor with
1
Move the cursor left and right with
the POSITION/CONTROL
buttons.
Align the cursor with CINEMA PULLDOWN
2
Move the cursor up and down with
the POSITION/CONTROL LM
buttons.
Set the cinema pulldown with the
3
POSITION/CONTROL
[ON]
: Cinema pulldown is active.
Detects whether film recording software or video
recording software was used. When film record-
ing software was used, it is progressively dis-
played with 2-3 pulldown or 2-2 pulldown.
[OFF]
: Cinema pulldown is cancelled.
There is a progressive display without 2-3
pulldown or 2-2 pulldown.
Press the EXIT button 2 times
4
Press the EXIT button one time to return to the main menu.
One further press removes the menu.
* Aligning the cursor with [ALL RESET] and pressing the PRO-
CEED button will return all the settings of the other functions
to the default settings.
44
P
M
LASMA
ONITOR
†
COLOR SYSTEM
: AUTO
P-ON MODE
: LAST MEM
POWER MANAGER
: OFF
SET ID NO
: ALL
RGB3 ADJUST
: 1
CINEMA PULLDOWN
: ON
STD/CINEMA
: STD
ALL RESET
COLOR SYSTEM
: AUTO
P-ON MODE
: LAST MEM
POWER MANAGER
: OFF
SET ID NO
: ALL
RGB3 ADJUST
: 1
CINEMA PULLDOWN
: ON
STD/CINEMA
: STD
ALL RESET
buttons
Standard/Cinema Image Settings (STD/CINEMA)
To display clearer images, settings are made with the standard image
and cinema image modes. Set to [CINEMA] for images such as mov-
ies, and set to [STD] for other images. Set [OSD MODE] to [PRO] on
the configuration menu, then perform the following operations.
Preparation Press the PROCEED button to display the main
menu.
Align the cursor with
1
Align the cursor with STD/CINEMA
2
Move the cursor up and down with
the POSITION/CONTROL LM
buttons.
Use the POSITION/CONTROL
3
buttons to set STD/CINEMA
[STD]
: Set for varieties of input other than that described
below.
[CINEMA] : Set for image inputs such as movies.
Press the EXIT button 2 times
4
Press the EXIT button one time to return to the main menu.
One further press removes the menu.
* Aligning the cursor with [ALL RESET] and pressing the PRO-
CEED button will return all the settings of the other functions
to the default settings.
Note:
I What is CINEMA PULLDOWN?
This is a mode to output DVD video information in a progressive signal
format.
I CINEMA PULLDOWN
• [ON]
Normally set to [ON]. This setting detects whether a DVD source was
based on film or video. When it was based on film, it will be progres-
sively displayed in the appropriate method.
• [OFF]
This setting is used for video source on DVD, converting into the pro-
gressive output.
COLOR SYSTEM
: AUTO
P-ON MODE
: LAST MEM
POWER MANAGER
: OFF
SET ID NO
: ALL
RGB3 ADJUST
: 1
CINEMA PULLDOWN
: ON
STD/CINEMA
: STD
ALL RESET
Advertisement
Table of Contents
