Audio Settings (Sound) - NEC PlasmaSync 42PD3 User Manual

Audio Settings (SOUND)

This menu sets the volume, balance, mute, and selection of input.
Note that only sound of the currently displayed signal is output.
Preparation Press the PROCEED button to display the main menu.
Align the cursor with
1
Move the cursor left and right with
the POSITION/CONTROL
buttons.
Align the cursor with the desired item
2
Move the cursor up and down with
the POSITION/CONTROL LM
buttons.
Adjust with the POSITION/CONTROL
3
buttons
Press the EXIT button 2 times
4
Press the EXIT button one time to return to the main menu.
One further press removes the menu.
VOLUME
BALANCE
MUTE : OFF
INPUT1 : VIDEO
INPUT2 : RGB1
VOLUME
BALANCE
MUTE : OFF
INPUT1 : VIDEO
INPUT2 : RGB1
VOLUME
BALANCE
MUTE : OFF
INPUT1 : VIDEO
INPUT2 : RGB1
Adjustment Screen
[VOLUME] : Adjusts the volume
Decrease
[BALANCE] : Adjusts the left and right volume balance.
L
Left side becomes stronger
[MUTE] : Switches off the sound (temporarily)
[OFF] : There is sound.
[ON] : Sound is switched off.
[INPUT 1] : Each press serves to advance the audio input
of AUDIO IN 1 by one step.
VIDEO RGB 1
[INPUT 2] : Each press serves to advance the audio input
of AUDIO IN 2 by one step.
RGB 2
RGB 1
Note:
Adjustments of [VOLUME], [BALANCE], [MUTE] will be stored in memory
for each input (VIDEO, RGB 1-3, DVD/HD, and SCART). To change these
settings, first display the source of which audio input you wish to adjust.
Increase
R L
R
Right side becomes stronger
RGB 2
DVD/HD
or
RGB 3
DVD/HD RGB 3
or
VIDEO
27
P M
LASMA ONITOR
†