Information Screen (Display Mode) - NEC PlasmaSync 42PD3 User Manual

Nec display solutions user's manual plasma monitor
Hide thumbs Also See for PlasmaSync 42PD3:
Table of Contents

Advertisement

Information Screen (DISPLAY MODE)

This permits a check of the signal (data) that is currently being input.
Set [OSD MODE] to [PRO] on the configuration menu, then perform the following operations.
Preparation Press the PROCEED button to display the main menu.
Align the cursor with
1
Move the cursor left and right with
the POSITION/CONTROL
buttons.
Press the EXIT button
2
This removes the menu.
Note:
There is a slight error between the vertical frequency (V-FREQ.) displayed
on the information screen and the actual vertical frequency of the con-
nected input signal.
A +/-3 Hz error exists for signals with a vertical frequency between 60 Hz
and 70 Hz, and a +/-5 Hz error exists for signals with a vertical frequency
above 70 Hz.
Please regard the frequency indications of the information screen in terms
of reference values only.
SOURCE INFO.
RGB1
H-FREQ.
31.5kHz
V-FREQ.
60.0Hz
H-POL.
NEG
V-POL.
POS
Information Screen
I When RGB input is selected
[SOURCE INFO.]:
RGB 1, RGB 2, RGB 3,
DVD/HD
[H-FREQ.] : Horizontal frequency
(kHz)
[V-FREQ.] : Vertical frequency (Hz)
[H-POL.]
: Polarity of horizontal
sync signal
NEG (Negative)
POS (Positive)
[V-POL.]
: Polarity of vertical sync
signal
NEG (Negative)
POS (Positive)
Note:
[NO SIGNAL] is displayed when no signal is present.
I When VIDEO input is selected
[SOURCE INFO.] :
VIDEO, SCART
[MODE]
: Color system standard
NTSC, PAL, SECAM
Note:
[NTSC] is displayed for 4.43 NTSC.
SOURCE INFO.
RGB1
H-FREQ.
31.5kHz
V-FREQ.
60.0Hz
H-POL.
NEG
V-POL.
POS
SOURCE INFO.
VIDEO
MODE : NTSC
35
P
M
LASMA
ONITOR

Advertisement

Table of Contents
loading

This manual is also suitable for:

Plasmasync 42vp3aPx-42vp3aPlasmasync px-42pd3

Table of Contents