Table of Contents
Advertisement
ID Number Setting (SET ID NO)
Important
When using more than one of these monitors, this function sets ID numbers
so that operation of the remote control does not cause multiple monitors to
operate at the same time.
(These ID numbers can also be used for control with RS-232C.)
The optional remote control is required to operate the plasma monitors for
each ID number independently. (These ID numbers also need to be assigned.)
Set [OSD MODE] to [PRO] on the configuration menu, then per-
form the following operations.
Preparation Press the PROCEED button to display the main
menu.
Align the cursor with
1
Move the cursor left and right with
the POSITION/CONTROL
buttons.
Align the cursor with SET ID NO
2
Move the cursor up and down with
the POSITION/CONTROL LM
buttons.
Set the ID number with the
3
POSITION/CONTROL
[ALL]
: ID number will not be set.
[001 to 256]: ID number will be set.
Press the EXIT button 2 times
4
Press the EXIT button one time to return to the main menu.
One further press removes the menu.
* Aligning the cursor with [ALL RESET] and pressing the PRO-
CEED button will return all the settings of the other functions
to the default settings. (The ID number will become [ALL].)
COLOR SYSTEM
: AUTO
P-ON MODE
: LAST MEM
POWER MANAGER
: OFF
SET ID NO
: ALL
RGB3 ADJUST
: 1
CINEMA PULLDOWN
: ON
STD/CINEMA
: STD
ALL RESET
COLOR SYSTEM
: AUTO
P-ON MODE
: LAST MEM
POWER MANAGER
: OFF
SET ID NO
: ALL
RGB3 ADJUST
: 1
CINEMA PULLDOWN
: ON
STD/CINEMA
: STD
ALL RESET
buttons
Other Functions (OTHER SETTINGS)
RGB 3 Adjustment (RGB 3 ADJUST)
Adjust this setting when the RGB 3 image is not stable.
Set [OSD MODE] to [PRO] on the configuration menu, then per-
form the following operations.
Preparation Press the PROCEED button to display the main
menu.
Align the cursor with
1
Move the cursor left and right with
the POSITION/CONTROL
buttons.
Align the cursor with RGB 3 ADJUST
2
Move the cursor up and down with
the POSITION/CONTROL LM
buttons.
Use the POSITION/CONTROL
3
the number that provides the best image
When the screen is not stable at [1] (the initial value), set the
adjustment to [2] or [3].
Press the EXIT button 2 times
4
Press the EXIT button one time to return to the main menu.
One further press removes the menu.
* Aligning the cursor with [ALL RESET] and pressing the PRO-
CEED button will return all the settings of the other functions
to the default settings.
Note:
Making this adjustment will cause the display position to change. To com-
pensate, set [AUTO PICTURE] (of the [Auto Picture/Wide Screen Settings])
to [OFF] and then to [ON], or readjust the display position.
COLOR SYSTEM
: AUTO
P-ON MODE
: LAST MEM
POWER MANAGER
: OFF
SET ID NO
: ALL
RGB3 ADJUST
: 1
CINEMA PULLDOWN
: ON
STD/CINEMA
: STD
ALL RESET
COLOR SYSTEM
: AUTO
P-ON MODE
: LAST MEM
POWER MANAGER
: OFF
SET ID NO
: ALL
RGB3 ADJUST
: 1
CINEMA PULLDOWN
: ON
STD/CINEMA
: STD
ALL RESET
buttons to set
P
M
LASMA
ONITOR
†
43
Advertisement
Table of Contents
