Plasmacluster Ion Generating Unit; Unit Replacing Light - Sharp KI-A60E Operation Manual

CARE AND MAINTENANCE CARE AND MAINTENANCE
PLASMACLUSTER ION GENERATING UNIT (electrode section)
Clean every 6 months or more often if necessary
Remove dust attached to the electrode section of the unit with the cleaning
brush included with the unit or a commercially-available cotton applicator.
(Ref. E-17 removing the unit)
Unit Cleaning Brush
Electrode Section
(4 parts)
Connection Terminals
CAUTION
• Do not touch the electrode section. Doing so can cause injury.
• Do not transform the electrode section. Doing so can damage it.
• Do not touch the connection terminals. Doing so can damage them.
• If dust has hardened, lightly water a commercially-available cotton applicator and then
wipe off the part.

UNIT REPLACING LIGHT

The Unit Replacing light will turn on after approximately 17,500 hours.
( 2 years × 24 hours = 17,500)
Elapsed Time
Begin use
Approx. 17,500 hours
Approx. 19,000 hours
<REPLACEMENT Plasmacluster Ion Generating Unit>
Please consult your dealer to purchase the following model.
Model : IZ-C75SE
<Disposal>
Dispose of the old Plasmacluster ion generating unit according to local laws and regulations.
-materials-
• Unit : Polystyrene terephthalate, electronic parts.
(When operated the unit around-the-clock.)
Electrode
Root of the
electrode
[ Before cleaning ]
Display
Flashing slowly
(red)
Flashing fast
(red)
E-16
[ After cleaning ]
Message
Replace the Plasmacluster
Ion Generating Unit
Stop operating the front
outlet Fan