Advertisement
Quick Links
V1.0
PSLLK1
Thank you for choosing our product! We strive to provide the best
quality and services for our customers. Would you kindly share
your experience on Amazon if you are satisfied? Should you have
any issues, please don't hesitate to contact us.
Telephone：
1-800-556-6806 Mon-Fri 10am - 6pm (PST) (USA) (CAN)
Email：
supportus@perlesmith.com (US/CA/DE/UK/FR/IT/ES/AU)
Advertisement
Related Manuals for Perlesmith PSLLK1
Summary of Contents for Perlesmith PSLLK1
- Page 1 V1.0 PSLLK1 Thank you for choosing our product! We strive to provide the best quality and services for our customers. Would you kindly share your experience on Amazon if you are satisfied? Should you have any issues, please don't hesitate to contact us.
-
Page 3: Important Safety Information
We hereby disclaim any liability for injury or damage arising from incorrect assembly, incorrect mounting, or incorrect use of this product. •DO NOT INSTALL INTO DRYWALL ALONE. •Please check www.perlesmith.com for more products and company information. Tools Needed (Not lncluded) Stud Finder... -
Page 4: Supplied Hardware
Supplied Hardware Hardware for Attaching TV Brackets to TV Spacers Washers [If necessary] M6/M8 2.5mm 10mm 22mm TV Screws [Only one size fits your TV] M6 x 15mm M6 x 35mm M8 x 25mm M8 x 35mm M8 x 50mm Hardware for Attaching the Wall Plate to Wall Lag Bolts Washers... - Page 5 Step 1 Check TV Hole Pattern and Select TV Screws 100 mm ≈ 4 in. 200 mm ≈ 7 7/8 in. 300 mm ≈ 11 3/4 in. 400 mm ≈ 15 3/4 in. 600 mm ≈ 23 6/10 in. Only one screw size fits your TV. Step 2 Select Spacers (if needed) NO SPACER...
- Page 6 Too Short Too Long Step 3 Secure the TV Brackets to Your TV No Spacer With Spacer Alternate Spacer Setups Step 4 Assemble the Wall Plate Secure the left half of wall plate [01] to the right half of wall plate [02] with the pre-assembled screw [S].
- Page 7 Step 5 Secure the Wall Plate [01] and [02] to Wall For wood stud installation, follow STEP 5A For concrete installation, follow STEP 5B Step 5A Wood Stud Option WARNING: ●Avoid potential personal injury or property damage! DO NOT over-tighten the lag bolts [A1].
- Page 8 65mm 5A-3 ø5.5mm Drill 4 pilot holes using a 5.5 mm diameter drill bit. Make sure the depth is not less than 60mm. 5A-4 Install the wall plate using lag bolts [A1] and washer [A2]. Tighten the lag bolts [A1] only until the washers [A2] are pulled firmly against the wall plate [01] and [02] .
- Page 9 5B-1 Position the wall plate at your desired height, level the wall plate and mark the pilot hole locations. 5B-2 Drill 4 pilot holes using a 10mm diameter drill bit. Make sure the depth is not less than 70mm. Never drill into the mortar between blocks.
- Page 10 Secure the TV onto the Wall Plate Step 6 Press Locking HEAVY! You may need assistance with this step. To Hang TV onto Wall Plate 1. Hang the TV brackets [03] and [04] onto the wall plate [01] and [02]. 2.
- Page 12 Would you kindly share your experience on Amazon if you are satisfied? Should you have any issues, please don't hesitate to contact us. Telephone： 1-800-556-6806 Mon-Fri 10am - 6pm (PST) (USA) (CAN) Email： supportus@perlesmith.com (US/CA/DE/UK/FR/IT/ES/AU)